Morse Code

0 in Morse Code

How many dashes are in 0 in Morse code?

The number 0 contains five dashes (—–) in International Morse Code. Each dash represents a long signal, with a short pause between consecutive dashes.

No, zero in Morse code uses only dashes. It is the only digit in the standard International Morse Code number system that consists entirely of five dashes.

Two consecutive zeros are written as —– —–. Each group of five dashes represents one zero, and the space between them indicates a character separation.

Frequently Asked Questions

Find clear answers to common questions about reading, writing, and learning 0 in Morse Code

Yes, the pattern is not the same for no/zero (0) as it is for the letter O, although both are only made from dashes. There are five dashes used for 0, and three dashes used for O.

Let’s do a quick comparison: 

The long beep signal is three times that of each of the short beeps. The gaps between the four sounds are equal; the sounds form a tone-like pattern. For instance, a short beep will be 0.1 seconds in duration, and there will be 0.1 seconds of pause between each beep, while the long beep will be 0.3 seconds in duration, and 0.1 seconds of pause will be there between each beep. These durations change depending on the sending speed, but their proportions stay the same. 
Character Morse Code Sound
Number 0 —– dah-dah-dah-dah-dah
Letter O — dah-dah-dah
  The main difference is the number of dashes. Adding or missing a dash can change the meaning of a message, especially when transmitting letters and morse code numbers together. For example, the word GO ends with three dashes for O, while the sequence G0 ends with five dashes for zero. If you’re learning the alphabet, check out our O in Morse Code guide to understand how the letter is written and transmitted.

Is Zero (0) the Same as the Letter O in Morse Code?

When saying “0” in Morse(code), say dah-dah-dah-dah-dah. Every “dah” is a dash, and there is a short pause between signals. This establishes a balance with which we can hear 0 easily. 

In Morse code, timing is just as important as the signals themselves:

  • Each dash (dah): Lasts three time units.
  • Between dashes: Leave a pause of one time unit.
  • Between characters: Leave a pause of three time units.

With one time unit as 0.1 seconds, for example, each dash duration is 0.3 seconds, and then a 0.1-second pause before a new dash.

If the player above isn’t working, listen for the 0 by following the five long beeps and they should be even. Repeat the Rhythm and “Say” the numbers aloud so people will be familiar with the sound of zero.

How to Say and Hear 0 in Morse Code

To write 0 in Morse code, use five dashes in a row: −−−−−. The number zero does not have any dots and dashes; it is made with long signals only.

Follow these easy steps: 

  1. Use only one (/).
  2. Perform the following dash five times to make −−−−−.
  3. Leave some space between every dash when transmitting code.
  4. Increase the delay between the sending of successive characters. 

Example: To write the number 10 in Morse code:

  • 1 = .—-
  • 0 = —–
  • 10 = .—- —–

The medium pattern identifies individual digits because they are only identified by the gap between the two patterns.

Type the Morse code for zero and use the copy button above to copy the code if you don’t want to type it out by hand.

How to Write 0 in Morse Code

The number 0 in the International Morse Code system is the 5 dots following the dashes (badadadadadad-). A dash is a long signal known as a “dah”. The five signals are combined to form the digit 0.

The Morse code for 0 is no dots at all, making it easy to recognise. This format is used whenever it is important to the pattern that a number 0 appears in your message, like in a date, sequential numbers, or in a phone number.

In Morse Code, every dash is followed by a short interval when 0 is coded. This aids the receiver in differentiating the signals they are receiving so they can identify each signal not as individual numbers but as one number.

What Is 0 in Morse Code?

The Morse code for 0 is —– (5 dashes). The number zero is dah-dah-dah-dah-dah, with each dash being a long note or “dah.” The word “dash” is used in International Morse Code to represent all five dashes. Note that zero is written with 5 dashes, whereas O is written with 3 dashes. The pattern can be copied, or the sound heard on our Morse Code Translator.
NUMBER 0 — MORSE CODE
−−−−−

Five dashes · dah-dah-dah-dah-dah

0 in Morse Code (·−): How to Write and Hear Zero